AddPac AP2520 VoIP Podręcznik Użytkownika Strona 263
- Strona / 368
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
PassFinder AP2520 VoIP Router/Gateway Operation Manual Version 1.10 / Mar. 2002
AddPac Technology Co., Ltd. -
263 -
5.7.3.20.2. Default
Type 5
5.7.3.20.3. Command Modes
Voice-port configuration(E&M)
5.7.3.20.4. Usage Guideline
This command (type) is applied only to the E&M voice port.
E&M type 1, 2, 3, and 5 of the AP2520 router is made through hardware jumper
setting. Unless administrators/users visually check hardware jumper setting,
they cannot check the operation type. To solve this problem,
administrators/users can use “type” command and add description of the
operation method to the router setup file. After this operation, the router
administrator can check the operation status of the E&M voice port using the
router setup file checking command.
For hardware jumper setting, refer to “Jumper Setting of E&M Module” of
“5.3.3.2 Setting E&M Port.”
5.7.3.20.5. Examples
In the following example, Type 5 is selected as the interface type of the voice
port.
voice-port 1/1
type 5
- PassFinder 1
- [ Contents ] 2
- AddPac Technology Co., Ltd 10
- [ Symbols and Legends ] 12
- Warning 12
- Internet 14
- Infranet 14
- 1.2. Main Features 15
- Hardware Description 16
- Voice over IP Service 16
- IP Routing Protocols 17
- WAN Protocols 17
- Network Managements 17
- Security Functions 17
- Operation and Managements 18
- Other Scalability Features 18
- 1.3. External View 19
- No. Label Description 20
- 2.1. Unpacking 21
- 2.2.3.2. Ethernet Port 27
- 3.1. Installation 29
- Port Configuration Settings 32
- AC110~220V 32
- 4.1. Gateway Booting 39
- 4.2. Command Usage 42
- Command Description 45
- Commands Description 46
- Configuration Mode) 51
- 4.4. Ethernet Configuration 53
- 4.4.2. PPPoE Configuration 57
- Operation 58
- 4.5.2. PPP Configuration 70
- 4.6. Routing Configuration 88
- 4.6.2. RIP Configuration 92
- 4.6.3. OSPF Configuration 98
- Caution 100
- Information 106
- [[Procedure] 107
- [NAT Glossaries] 114
- Step Operation 115
- Configuration 123
- 순서 작업 내용 Description 125
- Mandatory Commands 125
- Optional Commands 126
- DHCP Type = RELAY 129
- Next Server = 151.1.12.1 129
- [Procedure] 131
- 4.11. SNMP Configuration 136
- Sends a message 140
- 4.13.1. Logging Command 148
- 4.13.2. Show commands 149
- File Management 155
- 4.14.2. Password Recovery 157
- 5.1.1. Voice Over IP 165
- 5.1.2.1. Codecs 166
- 5.1.2.2. Mean Opinion Score 167
- 5.1.3. Dial Peer 169
- 5.1.4. Voice Ports 171
- IP Cloud 175
- Destination 175
- Voice Port 188
- Connection 188
- 5.3.4.3. Call barring 189
- Gateway 192
- Step Command Description 198
- 60 PIN CONNECTOR 202
- RJ45_4PORT 202
- 5.7.2.1. dial-peer hunt 221
- 5.7.2.1.5. Example 223
- 5.7.2.2.1. Syntax 223
- 5.7.2.2.2. Default Value 223
- 5.7.2.2.3. Command Mode 223
- 5.7.2.2.4. Usage Guideline 223
- 5.7.2.2.5. Examples 224
- 5.7.2.3.1. Syntax 225
- 5.7.2.3.2. Default Value 225
- 5.7.2.3.3. Command Mode 225
- 5.7.2.3.4. Usage Guideline 225
- 5.7.2.4. dial-peer voice 226
- 5.7.2.5. gateway 227
- 5.7.2.6. num-exp 228
- 5.7.2.6.5. Examples 230
- 5.7.2.7. translation-rule 231
- 5.7.2.8. voice-port 232
- 5.7.2.8.2. Default Value 233
- 5.7.2.8.3. Command Mode 233
- 5.7.2.8.4. Usage Guideline 233
- 5.7.2.8.5. Examples 233
- 5.7.2.9.1. Syntax 234
- 5.7.2.9.2. Default Value 234
- 5.7.2.9.3. Command Mode 234
- 5.7.2.9.4. Usage Guideline 234
- 5.7.2.9.5. Examples 235
- 5.7.2.10.1. Syntax 235
- 5.7.2.10.2. Default Value 235
- 5.7.2.10.3. Command Mode 235
- 5.7.2.10.4. Usage Guideline 236
- 5.7.2.10.5. Examples 236
- 5.7.2.11.1. Syntax 237
- 5.7.2.11.2. Default Value 237
- 5.7.2.11.3. Command Mode 237
- 5.7.2.11.4. Usage Guideline 237
- 5.7.2.12. voice service 238
- 5.7.2.13. VoIP-interface 239
- 5.7.2.13.2. Default Value 240
- 5.7.2.13.3. Command Mode 240
- 5.7.2.13.4. Usage Guideline 240
- 5.7.2.13.5. Examples 240
- 5.7.3.1. comfort-noise 242
- 5.7.3.2. connection 243
- 5.7.3.2.4. Usage Guideline 244
- 5.7.3.2.5. Examples 244
- 5.7.3.3.1. Syntax 244
- 5.7.3.4. echo-cancel 245
- 5.7.3.5. input gain 246
- 5.7.3.5.1. Syntax 247
- 5.7.3.5.2. Default Value 247
- 5.7.3.5.3. Command Mode 247
- 5.7.3.5.4. Usage Guideline 247
- 5.7.3.5.5. Examples 248
- 5.7.3.6.2. Default 248
- 5.7.3.6.3. Command Mode 248
- 5.7.3.6.4. Usage Guideline 248
- 5.7.3.7. output gain 249
- 5.7.3.8. polarity-inverse 250
- 5.7.3.9. ring number 251
- 5.7.3.10.1. Syntax 253
- 5.7.3.10.2. Default Value 253
- 5.7.3.10.3. Command Mode 253
- 5.7.3.10.4. Usage Guideline 253
- 5.7.3.10.5. Examples 253
- 5.7.3.11.5. Examples 255
- 5.7.3.12.2. Default 255
- 5.7.3.15.4. Examples 259
- 5.7.3.16.2. Default 259
- 5.7.3.16.3. Command Modes 259
- 5.7.3.18. Usage Guideline 260
- 5.7.3.19.1. Syntax 261
- 5.7.3.19.2. Default Value 261
- 5.7.3.19.3. Command Mode 261
- 5.7.3.19.4. Usage Guideline 261
- 5.7.3.19.5. Examples 262
- 5.7.3.20.2. Default 263
- 5.7.3.20.3. Command Modes 263
- 5.7.3.20.5. Examples 263
- 5.7.4. Dial Peer Commands 264
- 5.7.4.1. answer-address 264
- 5.7.4.2. codec 265
- 5.7.4.2.2. Default Value 266
- 5.7.4.2.3. Command Mode 266
- 5.7.4.2.4. Usage Guideline 266
- 5.7.4.2.5. Examples 266
- 5.7.4.3.1. Syntax 267
- 5.7.4.3.2. Default Value 267
- 5.7.4.3.3. Command Mode 267
- 5.7.4.3.4. Usage Guideline 267
- 5.7.4.3.5. Examples 267
- 5.7.4.4.1. Syntax 268
- 5.7.4.4.2. Default Value 268
- 5.7.4.4.3. Command Mode 268
- 5.7.4.4.4. Usage Guideline 268
- 5.7.4.4.5. Examples 269
- 5.7.4.5. dtmf-relay 270
- 5.7.4.6. forward-digits 271
- 5.7.4.7. huntstop 273
- 5.7.4.8. port 274
- 5.7.4.9. preference 275
- 5.7.4.10. prefix 276
- 5.7.4.11. register 277
- 5.7.4.11.1. Syntax 278
- 5.7.4.11.2. Default Value 278
- 5.7.4.11.3. Command Mode 278
- 5.7.4.11.4. Usage Guideline 278
- 5.7.4.12. session target 279
- 5.7.4.14. sid 281
- 5.7.4.14.4. Usage Guideline 282
- 5.7.4.14.5. Examples 282
- 5.7.4.15.1. Syntax 282
- 5.7.4.16. vad 283
- 5.7.4.16.1. Syntax 284
- 5.7.4.16.2. Default Value 284
- 5.7.4.16.3. Command Mode 284
- 5.7.4.16.4. Usage Guideline 284
- 5.7.4.16.5. Examples 284
- 5.7.4.17.1. Syntax 285
- 5.7.4.17.2. Default Value 285
- 5.7.4.17.3. Command Mode 285
- 5.7.4.17.4. Usage Guideline 285
- 5.7.4.17.5. Examples 285
- Configuration Command 286
- 5.7.5.1. announcement 286
- 5.7.5.2. codec preference 287
- 5.7.5.3. counter 288
- 5.7.5.4. discovery 289
- 5.7.5.5. fax protocol 290
- 5.7.5.6. fax rate 291
- 5.7.5.6.1. Syntax 292
- 5.7.5.6.2. Default Value 292
- 5.7.5.6.3. Command Mode 292
- 5.7.5.6.4. Usage Guideline 292
- 5.7.5.7. h323 call start 293
- 5.7.5.8. gkip 294
- 5.7.5.9. h323-id 295
- 5.7.5.10. lightweight-irr 296
- 5.7.5.10.1. Syntax 297
- 5.7.5.10.2. Default Value 297
- 5.7.5.10.3. Command Mode 297
- 5.7.5.10.4. Usage Guideline 297
- 5.7.5.10.5. Examples 297
- 5.7.5.11. h323 call channel 298
- 5.7.5.11.5. Examples 299
- 5.7.5.12.1. Syntax 299
- 5.7.5.12.2. Default Value 299
- 5.7.5.13. max-digits 300
- 5.7.5.14. password 301
- 5.7.5.15. public-ip 302
- 5.7.5.16. register 303
- 5.7.5.17. rule 304
- 5.7.5.17.1. Syntax 305
- 5.7.5.17.2. Default Value 305
- 5.7.5.17.3. Command Mode 305
- 5.7.5.17.4. Usage Guideline 305
- 5.7.5.17.5. Examples 306
- 5.7.5.18.1. Syntax 307
- 5.7.5.18.2. Default Value 307
- 5.7.5.18.3. Command Mode 307
- 5.7.5.18.4. Examples 307
- 5.7.5.19.1. Syntax 308
- 5.7.5.19.2. Default Value 308
- 5.7.5.19.3. Command Mode 308
- 5.7.5.19.4. Usage Guideline 308
- 5.7.5.20. timeout 309
- 5.7.5.20.2. Default Value 310
- 5.7.5.20.3. Command Mode 310
- 5.7.5.20.4. Usage Guideline 310
- 5.7.5.20.5. Examples 310
- 5.7.6.1. clear h323 call 313
- 5.7.6.2. clear voice port 314
- 5.7.6.3. show call active 314
- 5.7.6.3.1. Syntax 315
- 5.7.6.3.2. Default Value 315
- 5.7.6.3.3. Command Mode 315
- 5.7.6.3.4. Usage Guideline 315
- 5.7.6.3.5. Examples 315
- 5.7.6.4.1. Syntax 316
- 5.7.6.4.2. Default Value 316
- 5.7.6.4.3. Command Mode 316
- 5.7.6.4.4. Usage Guideline 316
- 5.7.6.4.5. Examples 316
- 5.7.6.7. show dial-peer 318
- 5.7.6.7.4. Usage Guideline 319
- 5.7.6.7.5. Examples 319
- 5.7.6.8.1. Syntax 319
- 5.7.6.8.2. Default Value 319
- 5.7.6.8.3. Command Mode 319
- 5.7.6.10. show gateway 321
- 5.7.6.11. show num-exp 322
- 5.7.6.13. show user-class 323
- 5.7.6.14. show voice port 324
- 5.7.6.16. debug VoIP call 326
- 5.7.6.17. debug VoIP 327
- (Optional) 330
- (mandatory) 332
- IP Routing Service 336
- LAN Service 336
- WAN Service 336
- Interoperability Features 338
- Hardware Specification 339
© 2020, manymanuals.pl. Wszelkie prawa zastrzeżone. | 0.122 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentarze do niniejszej Instrukcji